EUROVAC II WET MIX DUST COLLECTOR
EUROVAC II WET MIX DUST COLLECTOR
ELIMINATE DUST WITH A EUROVAC SYSTEM AND SOURCE CAPTURE SANDING TOOLS.
Dust is drawn into the unit through and forced down through a venturi, deep into the water. The water acts as a separator, and the majority of the dust particles fall to the bottom of the unit immediately. Those particles that manage to escape this first cleaning stage are forced through thick curtains of water and deflected by a series of baffles into the water turbulence, separating the remaining dust from the air. The moist, clean air is drawn through the unit by an internally fitted blower that passes through a stainless steel mist eliminator, where the moisture is removed from the clean air. The dust that has settled to the bottom of the unit is removed through the sludge drain valve.
Description:
- Powerful 13.8 amp motor with sealed bearings built to handle moist air from the wet collector. A 1560-watt pump produces 145” of water columns and 140 free-flow CFM. It has enough power for two technicians to sand with orbital sanders at the same time.
- Quiet operation, particularly for fine dust... motor housing is insulated and baffled for sound.
- On/off feature: The motor is turned on and off automatically by air switches when pneumatic tools are activated. This increases the motor's life and reduces its energy costs.
- Includes a plastic sight glass to determine when water should be added.
- Stainless steel mist eliminator.
- 2” ball valve & hose at the bottom of the separator for removing sludge.
Parts Numbers:
- SYS-050-18300000: EII Wet Mix Collector
- SYS-050-18300300: EII Wet Mix Collector w/ Low Water Automatic Shut Down
Specifications
- Blower: 2.5HP Brush Motor (4000 Hrs Intermittent Duty)
- Filtration: Initial Venturi Entry (for deep penetration of dust into the water), Secondary Baffles (to help knock water/dust back down), and Final Mesh Mist Eliminator (99% efficient to 5 microns)
- Controls (On/Off/Auto Switch): 3 Position Switch. Auto position will start and stop portable based on if the pneumatic tool is in operation
- Electrical: 115 Volt 1Ph 60Hz, 13.9 amp, 1512 Watt (US / Canada). Includes 15′ (4.55M) Electrical Cord
- Manual Drain Valve: Includes Plastic Bucket
- Water Level Indicator: Site Glass Indicates when Refill of Water is Required
- Manual Water Intake Port
- Relief Valve: Exhausts Hydrogen Gas Build-up in an Aluminum Application when the System is Shut Down
- Inlets: Qty 2: 1-1/2″ Inlets
- Dimensions: 26″W x 28″D x 62.5″H
System Performance:
- Vacuum – 146.6″WC
- Flow – 141.5 CFM
Includes:
- Qty 2 – 1-1/4″ to 1” x 20′ Hoses w/ Airline
- Qty 2 – Hose Hangers
More Information & Resources
Additional Documents: SYS-050-18300000 Brochure | SYS-050-18300300 Brochure
